Description
Mini-MAG XM is designed for pipes having a wall thickness from .250 to 3” (6.4mm to 76mm) with coatings up to 0.015″ (.4mm) thick. Mini-MAG XM has all of the outstanding features of the MagnaCut XM except for the Electronic Torch Arm. The cutting torch of the Mini-MAG XM moves backward and forward instead by means of a manually rotated rack with knob. Mini-MAG XM is capable of cutting both horizontal and vertical pipe and plate. The Mini-MAG XM is equipped with guide rollers for use with 1″ x 1″ x 1/8″ (25mm x 25mm x 3mm) angle iron or the MagnaCut XM Guide Strip for vertical cutting. A Guide Strip is recommended when using the Mini-MAG XM to cut pipes 18″ (457mm) and larger to improve cutting accuracy.
Welding with the Mini-MAG XM
Many companies have gained a decisive advantage by using the Mini-MAG XM as a tractor for a machine welding torch for long tedious horizontal stringer welds. The machine is available with a rack adjustable torch holder for a 1 3/8 inch (35mm) machine torch with 32 pitch or a metric torch rack. The Mini-MAG XM can propel the welding torch at speeds from 2″ to 40″ (51mm to 1016mm) per minute depending on the welding source, gas mixture, and deposition rate.
Features:
- VERSATILE—Bevels plate and pipe at angles to 45º.
- MINIMUM SET-UP TIME— Just strap on and begin cutting!
- ADAPTABLE—Can be used with oxy/fuel or plasma machine torches having a 1 3/8″ (35mm) barrel diameter.
- ELIMINATES the need for more than one machine for different pipe and plate sizes.
- The Mini-MAG XM is equipped with guides that can be used with 1″ X 1″ X 1/8″ (125mm x 125mm x 3mm) angle iron for vertical (up or down) welding applications.
MiniMag XM Pipe Cutter
MiniMag Kit includes:
- Base Machine
- Motor Control Box
- Torch Arm
- Sliding Support
- Torch Holder
- 74″ / 1880mm long Safety Cable for pipe diameters up to 24″ / 610mm pipe
- Two (2) Snap Hooks
- Protective Leather Cable Sleeve
- Standard Mathey Dearman Motor Control Box
- Parts and Operating Manual
- Custom Storage Box
Not Included:
- Machine cutting torch
Specifications
| MODEL | PART NUMBER | EST. SHIPPING WT (lbs / kg) |
| Mini-MAG XM, 115 vac | 05.0550.MINIXM | 39 / 17.6 |
| Mini-MAG XM, 230 vac | 05.0550.MINIXM2 | 39 / 17.6 |
| Description | Mini-MAG XM | |
| Method of Attachment to Pipe or Plate | Rare Earth Magnets | |
| Magnetic Pull per Wheel Assembly | 150lbs / 68kg | |
| Set Up Time | 2 Minutes or less | |
| Cutting Range (when placed on outside diameter of pipe) | 6 5/8″ / 168mm and up | |
| Cutting Range (when placed on inside diameter of pipe) | 24″ / 610mm and up | |
| Minimum Speed | 2″ / 51mm per minute | |
| Maximum Speed | 40″ / 1016mm per minute | |
| Net Weight | 31 lbs / 14 kg | |
| Shipping Weight | 39 lbs / 17.6 kg | |
| Shipping Dimensions | 18″ x 18″ x 10″ / 457 x 457 x 254mm | |
| Width | 17″ / 431mm | |
| Length | 13″ / 330mm | |
| Height | 9″ / 229mm | |
| Electrical Requirement | 115 vac or 230 vac 50/60Hz | |
WARNING: THE FOLLOWING MAY VOID WARRANTY OR CAUSE PERSONAL INJURY
- The MiniMag XM should not be used on heavy wall pipe or plate thicker than 3″ (76mm).
- The MiniMag XM is not designed for use with 1 3/4″ (44mm) or 2 ½” (64mm) barrel Plasma torches.
- ALWAYS SECURE the machine to the pipe with a safety strap.
- Mathey Dearman should be contacted prior to attempting any application not listed in the catalog.
- MagnaCut XM is not designed for cutting spiral welded pipe.
- Persons wearing a pacemaker should not come in contact with this equipment.