Description
Runpul – Automated hydraulic tube puller for the continuous high speed extraction of tubes for maintenance operations
The Maus Italia Runpul series of tube pullers are the result of more than thirty years’ of experience in the field of tube extraction.
The Runpul is a double-jaw tube puller for continuous high-speed tube extraction
It is available in two models: electric or pneumatic
The Runpul extractor is supplied with:
- Tube puller Runpul
- Carrying case
- Set of spare gaskets
- Set of service wrenches
- Instruction booklet
 |
USD The USD, or “Unclamping system device”, is an emergency system for unlocking jaws that have become locked on to the tube due to rust. |
 |
OPS The OPS, or “OverPressure switch”, cuts off oil delivery when the piston reaches the end of its stroke, preventing unnecessary overpressure of the system. |
 |
Remote control RC24 The RC24 remote control which is located alongside the knobs, facilitates and speeds up the extraction of the tubes. The remote control is supplied on both the pneumatic and electric models. |
 |
Revolving support ring RSR The RSR, or “Revolving support ring”, upon which the Runpul is suspended during use, allows optimal positioning in difficult-to-access areas. |
The Runpul extractor is available in four models
Runpul 15
The Runpul 15, with a pulling force of 15KN, is specified for tubes from 3/8″ up to 1.1/8″ ( from 9,52 up to 28,58 mm)
Runpul 30
The Runpul 30, with a pulling force of 30KN, is specified for tubes from 3/8″ up to 1.1/4″ ( from 9,52 up to 42,40 mm)
Runpul 45
The Runpul 45, with a pulling force of 45KN, is specified for tubes from 1″ up to 3″ ( from 25,40 up to 76,20 mm )
Runpul 60
The Runpul 60, with a pulling force of 60KN, is specified for tubes from 2″ up to 4″ ( from 50,80 up to 101,60 mm )